Welcome to SolidSurface.com | 888-715-3007

My Cart (0)
FREE SHIPPING!! on 3+ Any Full Sheets ($89 for 1 or 2) CONTIGUOUS USA FREE SHIPPING!! on 40+ sqft Overstock Partial Sheets

Edge Detail Router Bits for Decorative Edging

Edge detail bits are used for finishing countertop edges with a decorative pattern. These bits come in several shapes and sizes to offer selection and variety to any home or commercial project that requires the creation of decorative counter edges.

Edge detail router bits will effectively trim solid surface materials, hardwood, and other composite materials. Edge detail bits are for use with hand-held portable routers. Select an edge detail router bit that is sized for the job, and don't forget to pick up the appropriate accessories for your tools.

Need help? We can help you choose the correct edge detail bit for your project.

  1. 1
  2. 2
Set Descending Direction

Grid  List 

Showing 1 - 20 of 26 Results

  1. Corner Rounding With Ultra-Glide(TM) Ball Bearing Guide Assembly

    Corner Rounding With Ultra-Glide(TM) Ball Bearing Guide Assembly

    Starting at: $44.00

    Use this bit for rounding edges, or roundover, where there's access to a flat surface for the Ultra-Glide ™ non-marring bearing to reference. Used in concert with either the Countertop ('No-Drip') Design bit or the comer-rounding bit with a radius bearing, this bit will produce a no-drip edge or a bullnose in two passes. Learn More
  2. Face Inlay Router Bits w/ 3 Ball Bearings

    Face Inlay Router Bits w/ 3 Ball Bearings

    Starting at: $49.00

    Face-Inlay Router Bits Learn More
  3. Roman Ogee Router Bits w/ Ultra-Glide Bearing

    Roman Ogee Router Bits w/ Ultra-Glide Bearing

    Starting at: $59.00

    Roman Ogee Router Bits Learn More
  4. Edge Face Cove Router Bits w/ Ultra-Glide(TM) Bearing for Surell(R) Solid Surface

    Edge Face Cove Router Bits w/ Ultra-Glide(TM) Bearing for Surell(R) Solid Surface

    Starting at: $78.00

    Edge Face Cove Router Bits for Solid Surface Material Learn More
  5. Counter-Top Trim Router Bits-6 Wing

    Counter-Top Trim Router Bits-6 Wing

    Starting at: $80.00

    Create extra-smooth shallow recesses in countertops with this 6-wing tool. The radiused cutting tips produce an edge that's easy on the fingers and simple to clean. Use in a handheld router. Learn More
  6. Chamfer w/ Ultra-Glide(TM) Bearing Router Bits

    Chamfer w/ Ultra-Glide(TM) Bearing Router Bits

    Starting at: $87.00

    Chamfer and even bevel solid-surface edges with one of these two bits. These large bits must be run at reduced speed in a high-horsepower router. Learn More
  7. Long Ogee w/ Ultra-Glide(TM) Bearing Router Bits

    Long Ogee w/ Ultra-Glide(TM) Bearing Router Bits

    Starting at: $93.00

    2 Flute With Ultra-Glide™ Ball Bearing Guide Assembly. Learn More
  8. Corner Rounding Router Bits w/ Ultra-Glide(TM) Radius Bearing

    Corner Rounding Router Bits w/ Ultra-Glide(TM) Radius Bearing

    Starting at: $94.00

    This unique tool produces a true 180o bullnose in two passes. Make the first pass with a regular 1/4' x 5/8" steel bearing (optional). Switch to the  Ultra-Glide™ radius bearing for the second pass. This unique bearing follows the curved surface, eliminating the flat track typical of the two-pass cut with the regular bearing. This is also called a double roundover bullnose. Learn More
  9. Decorative Edge Trim Router Bit

    Decorative Edge Trim Router Bit

    Starting at: $94.00

    Amana Tool® has a wider variety of profile cutters designed specifically for use on solid-surface materials than any other manufacturer. This series of profile cutters are scaled for thick or even built up solid-surface structures. With most profiles, uncomfortably sharp edges are entirely eliminated, replaced with soft curves.
    All bits are equipped with easy-on-the-material Ultra-Glide™ pilot bearings.
    All are large bits that must be run at reduced speed in a high-horsepower router.

    Learn More
  10. Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57214

    Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57214

    Starting at: $107.00

    Amana Tool® has a wider variety of profile cutters designed specifically for use on solid-surface materials than any other manufacturer. This series of profile cutters are scaled for thick or even built up solid-surface structures. With most profiles, uncomfortably sharp edges are entirely eliminated, replaced with soft curves.
    All bits are equipped with easy-on-the-material Ultra-Glide™ pilot bearings.
    All are large bits that must be run at reduced speed in a high-horsepower router.

    Learn More
  11. Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57216

    Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57216

    Starting at: $107.00

    Amana Tool® has a wider variety of profile cutters designed specifically for use on solid-surface materials than any other manufacturer. This series of profile cutters are scaled for thick or even built up solid-surface structures. With most profiles, uncomfortably sharp edges are entirely eliminated, replaced with soft curves.
    All bits are equipped with easy-on-the-material Ultra-Glide™ pilot bearings.
    All are large bits that must be run at reduced speed in a high-horsepower router.

    Learn More
  12. Undermount Bowl Router Bits w/ Ultra-Glide(TM) Bearing-Roundover

    Undermount Bowl Router Bits w/ Ultra-Glide(TM) Bearing-Roundover

    Starting at: $108.00

    Undermount Bowl Router Bits Learn More
  13. Double Bullnose Router Bits

    Double Bullnose Router Bits

    Starting at: $130.00

    Double Bullnose Router Bits Learn More
  14. Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57204

    Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57204

    Starting at: $130.00

    Amana Tool® has a wider variety of profile cutters designed specifically for use on solid-surface materials than any other manufacturer. This series of profile cutters are scaled for thick or even built up solid-surface structures. With most profiles, uncomfortably sharp edges are entirely eliminated, replaced with soft curves.
    All bits are equipped with easy-on-the-material Ultra-Glide™ pilot bearings.
    All are large bits that must be run at reduced speed in a high-horsepower router.

    Learn More
  15. Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57212

    Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57212

    Starting at: $130.00

    Amana Tool® has a wider variety of profile cutters designed specifically for use on solid-surface materials than any other manufacturer. This series of profile cutters are scaled for thick or even built up solid-surface structures. With most profiles, uncomfortably sharp edges are entirely eliminated, replaced with soft curves.
    All bits are equipped with easy-on-the-material Ultra-Glide™ pilot bearings.
    All are large bits that must be run at reduced speed in a high-horsepower router.

    Learn More
  16. Bevel Router Bits

    Bevel Router Bits

    Starting at: $138.00

    Forms a profile decorative edge for solid surface material. Learn More
  17. Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57202

    Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57202

    Starting at: $138.00

    Amana Tool® has a wider variety of profile cutters designed specifically for use on solid-surface materials than any other manufacturer. This series of profile cutters are scaled for thick or even built up solid-surface structures. With most profiles, uncomfortably sharp edges are entirely eliminated, replaced with soft curves.
    All bits are equipped with easy-on-the-material Ultra-Glide™ pilot bearings.
    All are large bits that must be run at reduced speed in a high-horsepower router.

    Learn More
  18. Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57206

    Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57206

    Starting at: $152.00

    Amana Tool® has a wider variety of profile cutters designed specifically for use on solid-surface materials than any other manufacturer. This series of profile cutters are scaled for thick or even built up solid-surface structures. With most profiles, uncomfortably sharp edges are entirely eliminated, replaced with soft curves.
    All bits are equipped with easy-on-the-material Ultra-Glide™ pilot bearings.
    All are large bits that must be run at reduced speed in a high-horsepower router.

    Learn More
  19. Multi Radius w/Ultra-Glide(TM) Bearing Router Bits

    Multi Radius w/Ultra-Glide(TM) Bearing Router Bits

    Starting at: $155.00

    Multi Radius Router Bit Learn More
  20. Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57254

    Decorative Edge Router Bits w/Ultra-Glide(TM) Bearing - 57254

    Starting at: $157.00

    Amana Tool® has a wider variety of profile cutters designed specifically for use on solid-surface materials than any other manufacturer. This series of profile cutters are scaled for thick or even built up solid-surface structures. With most profiles, uncomfortably sharp edges are entirely eliminated, replaced with soft curves.
    All bits are equipped with easy-on-the-material Ultra-Glide™ pilot bearings.
    All are large bits that must be run at reduced speed in a high-horsepower router.

    Learn More
  1. 1
  2. 2
Set Descending Direction

Grid  List 

Showing 1 - 20 of 26 Results